Listado de Fabricantes

Skamovil en VeriSign Accredited en VeriSign

WORKABOUT PRO 3 (N/P: WP3)

Saque el máximo partido de la movilidad Creado para el trabajador móvil, el terminal WORKABOUT PRO 3 es ideal para los empleados de una amplia gama de industrias, como servicios móviles de campo, logística, almacenaje, transporte, fabricación, etc. Su gran flexibilidad le permite suministrar un dispositivo para satisfacer muchos requisitos: WORKABOUT PRO 3 está diseñado para ser un elemento fundamental de su infraestructura de TI. El terminal WORKABOUT PRO 3, producto líder en su categoría, le permite obtener exactamente el dispositivo que necesita. Además, tiene la oportunidad de conseguir los complementos que necesite hoy y la posibilidad de añadir más características en cualquier momento, a medida que cambien sus necesidades de negocio.

Datos técnicos PXA270 a 520 MHz , 256 MB de Flash, 128 MB de RAM, Bateria de alta capacidad de 3000 mAh, Bateria de super alta capacidad de 4000 mAh, Bateria inteligente avanzada con indicador de nivel de gasRain/Dust: IP65, IEC 60529 Operating temperature: -20C to +50C ( -4F to 122F) 5%-95% RH non-condensing Storage temperature: -40C to +60C (-40F to 140F) ESD: +/- 8kVdc air discharge ,+/- 4kVdc contacts 802.11a/b/g, 802.11b/gGSM/GPRS EDGE: Cuatro bandas: 850/900/1800/1900 MHz Voz y datos UMTS/HSDPA: Triple banda: 850/1900/2100 MHz Voz y datos Bluetooth clase II integrado, V 2.0 + EDR

Variantes del Producto
Accesorios
Consumibles
Productos Relacionados

WORKABOUT-PRO-B

PXA270 a 520 MHz , 256 MB de Flash, 128 MB de RAM, Bateria de alta capacidad de 3000 mAh, Bateria de super alta capacidad de 4000 mAh, Bateria inteligente avanzada con indicador de nivel de gasRain/Dust: IP65, IEC 60529 Operating temperature: -20C to +50C ( -4F to 122F) 5%-95% RH non-condensing Storage temperature: -40C to +60C (-40F to 140F) ESD: +/- 8kVdc air discharge ,+/- 4kVdc contacts 802.11a/b/g, 802.11b/gGSM/GPRS EDGE: Cuatro bandas: 850/900/1800/1900 MHz Voz y datos UMTS/HSDPA:...

1D xMod SE955 Scanner

The SE955 Scanner Module provides the smallest and lightest scan engine available while still offering high performance in 1D bar code scanning. The SE955 features the unique ?Adaptive Logic Technology? that enables damaged or poorly printed bar codes to be read. The ultra slim SE955 Scanner Module adds just 32g of weight and is integrated onto the back of the WORKABOUT PRO, ensuring that the unit is still light and ergonomic. This scanning module has a working range of up to 88.9cm (35in.) and...
Memory Card Secure Digital San

For additional storage, this memory card provides 128MB of memory in Secure Digital format. This memory card is easy to install in the WORKABOUT PRO?s user accessible SD/MMC memory card slot....
1D xMod SE1223 High Performanc

he SE1223 High Performance Scanner Module provides the highest performance in 1D bar code scanning. Only adding an additional 75g of weight to the WORKABOUT PRO, this scanner module ensures that users of the handheld computer can still maintain comfortable one-handed use for an entire shift without muscle fatigue. The scanner module integrates seamlessly into the back of the WORKABOUT PRO with six screws and can be installed with ease. The SE1223 High Performance Scanner Module supports the...
802.11b/g Direct Sequence (DS)

This 802.11b/g WLAN radio (also known as WiFi Radio) is provided in a user installable standard Compact Flash (CF) card format. This radio form factor enables users to add a WLAN radio to their device as required without returning it to the depot or having to buy a new device. The radio kit comes with the CF Card Radio, the mechanical stop, and the screws that are required to secure the radio in place....
GSM/GPRS/EDGE xMod Radio (c/w

The GSM/GPRS module is a GSM radio expansion-module mounted on a user installable daughter board that interfaces easily with the 100-Pin connector located inside the WORKABOUT PRO accessed through the back cover plate. The expansion module accommodates a GSM/GPRS radio and a SIM card and is equipped with a built-in antenna which fits entirely inside the WORKABOUT PRO and under the end-cap....
GSM/GPRS xMod Radio (c/w CF/GS

The PC Card radio kit includes:? 1) a PC Xmod which provides an interface for the PCMCIA card through the 100-Pin connector, 2) a mechanical stop to secure a snug fit for PC Card in the terminal and 3) a ruggedized plastic end-cap to protect the protruding antenna....
PC Card Radio Kit

The PC Card radio kit enables WORKABOUT PRO users to access wide-area wireless networks (WWAN) by installing a PCMCIA radio card such as the Sierra AirCard 550/555 (1xRTTCDMA) or AirCard 775 (GSM/GPRS)....
Universal Power Supply for Qua

The universal power supply is used to provide DC power to the quad docking station (WA4004, WA4104) from an AC source. A power lead is not included but can be ordered separately to suit the customer?s region....
Universal Power Supply for Qua

The universal power supply is used to provide DC power to the desktop docking station (WA4002-1, WA4102-1) from an AC source. A power lead is not included but can be ordered separately to suit the customer?s region. ...
Universal Power Supply for Doc

The universal power supply is used to provide DC power to the desktop docking station (WA4002-1, WA4102-1) from an AC source. A power lead is not included but can be ordered separately to suit the customer?s region....
Automotive Power Supply (no le

ncludes automotive adapter and tether cable....
Power Supply AC Plus Tether Ca

Together, this power supply and tether cable give users the ability to power and charge the WORKABOUT PRO from an AC power source. A power lead is not included but can be ordered separately to suit the customer?s region....
Power Pre-Regulator (15-55V)

The DC/DC power pre-regulator provides power to the WORKABOUT PRO from any vehicle providing 15-55VDC input voltage....
Power Lead for Desktop Docking

This 6 ft power lead has a European plug and is used with the desktop docking station (WA4002-1, WA4102-1)....
Power Lead for AC Power Supply

This 6 ft power lead is used to provide AC power to the universal power supply from a UK plug....
Power Lead for 4 Unit Docking

This 6 ft power lead has a UK plug and is used with the quad dock (WA4004, WA4104)....
Power Lead for 4 unit Docking

This 6 ft Power Lead has a European plug and is used with the Quad Dock (WA4004, WA4104)....
Power Lead for 4 unit Docking

This 6 ft Power Lead has a North American plug and is used with the Quad Dock....
Charger, Single Unit Power Sup

This AC adapter is used to provide power to a Single Unit Charger (WA3001). This power supply uses a UK plug....
Charger, Single unit Power Sup

This AC adapter is used to provide power to a Single Unit Charger (WA3001). This power supply uses a North American plug....
Charger, Single Unit Power Sup

This AC adapter is used to provide power to a Single Unit Charger (WA3001). This power supply uses a European plug...
Vehicle Cradle USB Cable Adapt

The Port Replicator is an optional accessory that allows peripherals (e.g. printers or weigh scales) to be attached to the powered or un-powered Vehicle Cradles (WA1000, WA1010, WA1100, or WA1110) for the WORKABOUT PRO. The Port Replicator supports as many as three serial devices and a USB Host when connected to the WORKABOUT PRO through a Vehicle Cradle....
Port Replicator

This extremely rugged, heavy-duty universal mounting system with 1? ball joints, allow the Vehicle Cradle to be mounted in any vehicle providing easy access to the WORKABOUT PRO. This universal mounting system has locking joints and allows attached terminals to be adjusted three-dimensionally giving maximum display readability and device usability....
RAM B 101 Mount

This extremely rugged, heavy-duty universal mounting system with 1? ball joints, allow the Vehicle Cradle to be mounted in any vehicle providing easy access to the WORKABOUT PRO. This universal mounting system has locking joints and allows attached terminals to be adjusted three-dimensionally giving maximum display readability and device usability....
Powered Vehicle Cradle 12V (S)

The Powered Vehicle Cradle is a highly ruggedized, single unit station dock. The Powered Vehicle Cradle is designed to allow the WORKABOUT PRO to be powered by a vehicle battery. The battery installed in the WORKABOUT PRO is also recharged by the vehicle battery. This option accepts DC power sources over the range 9V to 20V. Although it provides quick insertion and removal, the cradle holds the WORKABOUT PRO S securely even when operated in high vibration environments....
Powered Vehicle Cradle 12V (C)

The Powered Vehicle Cradle is a highly ruggedized, single unit station dock. The Powered Vehicle Cradle is designed to allow the WORKABOUT PRO to be powered by a vehicle battery. The battery installed in the WORKABOUT PRO is also recharged by the vehicle battery. This option accepts DC power sources over the range 9V to 20V. Although it provides quick insertion and removal, the cradle holds the WORKABOUT PRO C securely even when operated in high vibration environments....
Stylus for WORKABOUT PRO G2

This pack contains 5 replacement styluses suitable for all WORKABOUT PRO models....
Plate Back Cover, Standard

This replacement Back Plate Cover is suitable for all WORKABOUT PRO models....
Memory Card Secure Digital San

For additional storage, this memory card provides 256MB of memory in Secure Digital format. This memory card is easy to install in the WORKABOUT PRO?s user accessible SD/MMC memory card slot....
2D Large Pod SX5400 Imager

SX5400 2D?large pod imager.? Compatible with G2 only.? Also compatible with WA6102-G1 pistol grip....
1D EV15 Imager

This integrated 1D imager provides exceptional scanning performance and great reliability at a fraction of the cost of a standard laser bar code scanner. This imager has a quicker scan rate (270 scans per second) compared to that of laser bar code scanners which translates to enhanced decoding of degraded bar codes. The imager is also able to decipher bar codes in a full range of lighting conditions from total darkness to complete sunlight. Furthermore, because the imager does not have any...
2D Slim Pod HHP 5180 Imager

Compatible with pistol grip WA6102-G1 as well as?with G1 and G2....
3-Port Serial End-Cap (Kit)

The 3-Port Serial End-Cap provides IrDA, RS232, and TTL connectivity in a convenient location at the top of the WORKABOUT PRO....
End-Cap (Standard)

This replacement part is for a standard End-Cap suitable for all WORKABOUT PRO models....
End-Cap (Extended)

The 1D Laser End-Cap without GSM Antenna Shroud is a compact and ergonomic scanning solution. The 1D laser scanner reads at a rate of 104 scans/second ? 12 scans/second (bi-directional). It reads the following symbologies in a range of code sizes from 4mil to 55mil. The 1D laser scanner supports the following symbologies: UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar, MSI Plessey. The 1D Laser End-Cap without GSM Antenna Shroud is not compatible with the GSM radio.?...
1D Laser End-Cap without GSM A

The 1D Laser End-Cap without GSM Antenna Shroud is a compact and ergonomic scanning solution. The 1D laser scanner reads at a rate of 104 scans/second ? 12 scans/second (bi-directional). It reads the following symbologies in a range of code sizes from 4mil to 55mil. The 1D laser scanner supports the following symbologies: UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar, MSI Plessey. The 1D Laser End-Cap without GSM Antenna Shroud is not compatible with the GSM radio.?...
1D Laser End-Cap with GSM Ante

The 1D Laser End-Cap with GSM Antenna Shroud is a compact and ergonomic scanning solution. The 1D laser scanner reads at a rate of 104 scans/second ? 12 scans/second (bi-directional). It reads the following symbologies in a range of code sizes from 4mil to 55mil. The 1D laser scanner supports the following symbologies: UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar, MSI Plessey. The 1D Laser End-Cap without GSM Antenna Shroud is compatible with the GSM radio.? Compatible...
1D Imager End-Cap without GSM

The 1D Imager End-Cap without GSM Antenna Shroud is a low power, compact, and ergonomic scanning solution. It has an extremely high read rate which makes it an ideal alternative to laser scanners at a very competitive price. It automatically and instantly adapts to varying light conditions and provides users a bright targeting line that is readable even in bright sunlight. The high resolution 1D imager allows for the scanning of very small feature (5mil) codes while also providing the ability to...
D Imager End-Cap with GSM Ante

The 1D Imager End-Cap with GSM Antenna Shroud is a low power, compact, and ergonomic scanning solution. It has an extremely high read rate which makes it an ideal alternative to laser scanners at a very competitive price. It automatically and instantly adapts to varying light conditions and provides users a bright targeting line that is readable even in bright sunlight. The high resolution 1D imager allows for the scanning of very small feature (5mil) codes while also providing the ability to...
Quad Docking Station c/w UPS (

The 4 unit Multi-Dock allows up to four WORKABOUT PRO S units to be charged simultaneously while providing 10/100 BaseT Ethernet communications in excess of 2Mbps. This version of the 4 unit Multi-Dock is compatible with 7525S-G1, and 7527S-G2.? It also provides sufficient power to fast charge the batteries in the unit. Charging internal batteries of the terminal takes approximately 2-4 hours depending on the battery type. This docking station can consume up to 3A @ 120V AC or 1.5A @ 240V AC. A...
Quad Docking Station c/w UPS (

The 4 unit Multi-Dock allows up to four WORKABOUT PRO C units to be charged simultaneously while providing 10/100 BaseT Ethernet communications in excess of 2Mbps. This version of the 4 unit Multi-Dock is compatible with 7525M-E, 7525C-G1, and 7527C-G2.? It also provides sufficient power to fast charge the batteries in the unit. Charging internal batteries of the terminal takes approximately 2-4 hours depending on the battery type. This docking station can consume up to 3A @ 120V AC or 1.5A @...
Quad Battery Charger

The Quad Battery Charger is capable of charging four batteries at once and can charge either Standard or High Capacity batteries. It comes with a Universal Power Supply. An appropriate power lead should be ordered at the time of purchase.? Works with all approved WORKABOUT PRO batteries....
Single Battery Charger

The Single Battery Charger charges standard or High Capacity batteries one at a time. An appropriate power lead should be ordered at the time of purchase. (Universal Power Supply comes with the lead.)? Works with all approved WORKABOUT PRO batteries....
Desktop Docking Station with A

The Desktop Docking Station supports all C and S variants of WORKABOUT PRO G1 AND G2 devices and allows a WORKABOUT PRO M/C to be charged while simultaneously providing USB Host and Client functions. The Host USB port allows peripherals such as a printer, a keyboard, or a mouse to be connected while the Client USB port allows connectivity of the Docking Station to a PC. An additional spare battery charge well is integrated into the Desktop Docking Station to ensure that your spare batteries...
Hanstrap with Loop (M,C)

The handstrap attaches to the back of the WORKABOUT PRO and provides a solid grip of the unit. It comes with two screws and instructions for assembly. Even with the strap installed, it is easy to access the battery.? For WORKABOUT PRO M & C models....
Hanstrap with Loop (S)

The handstrap attaches to the back of the WORKABOUT PRO S and provides a solid grip of the unit. It comes with two screws and instructions for assembly. Even with the strap installed, it is easy to access the battery....
Pistol Grip

The WORKABOUT PRO pistol grip attachment allows users to convert the WORKABOUT PRO to a convenient pistol grip unit. This WORKABOUT PRO pistol grip works with the WA9000-G1, WA9003-G1, and WA9005-G1 and it is?compatible with G1 and G2 models.? The pistol grip comes with 4 screws and a printed instruction sheet. (Instructions are also available electronically)....
Pistol Grip for 2D Slim Pod HH

The WORKABOUT PRO pistol grip attachment allows users to convert the WORKABOUT PRO to a convenient pistol grip unit. The pistol grip comes with 4 screws and a printed instruction sheet. (Instructions are also available electronically)...
Shoulder Strap for Protective

The 6-foot shoulder strap with pad allows a user to hang the terminal, in the protective case, over their shoulder. Hanging the terminal facilitates unimpaired operator movement. The shoulder strap attaches to metal clips on the protective case....
Protective Carrying Case (S)

The case does not interfere with scanning and can be used with or without the scanner attached. It can also be used with either the pistol grip and non-pistol grip units, as well as with the hand strap. Removing the hand held is easily done through a ?trap door? on the back of the case. This case is also compatible with the standard shoulder strap (P/N 30585), however, only the belt loop is included....
Protective Carrying Case (M,C)

The case does not interfere with scanning and can be used with or without the scanner attached. It can also be used with both the pistol grip and non-pistol grip units. Removing the handheld is easily done through a ?trap door? on the back of the case. This case is also compatible with the standard shoulder strap (P/N 30585), however, only the belt loop is included....
Nylon Pouch (M,C,S)

The nylon pouch is an ideal accessory for carrying the WORKABOUT PRO when using it without the pistol grip. It will work with each of the M, C and S models. The pouch comes with a metal swivel and belt loop. Because the WORKABOUT PRO is inserted into the pouch facing upright, the pouch will not interfere with the PC card end cap....
Soft-Shell Holster

This convenient and easy to use soft-shell holster with removable belt and swivel holster pad can be used to hang a WORKABOUT PRO with a pistol grip securely from the waist....
Handstrap (S)

The handstrap attaches to the back of the WORKABOUT PRO S and provides a solid grip of the unit. It comes with two screws and instructions for assembly. Even with the strap installed it is easy to access the battery....
Handstrap (M,C)

The handstrap attaches to the back of the WORKABOUT PRO and provides a solid grip of the unit. It comes with two screws and instructions for assembly. Even with the strap installed it is easy to access the battery.? For WORKABOUT PRO M & C models....
Cable, Tether Open Ended with

This cable has tether open ended with strain relief (150 mm/6ft)....
Tether to USB B for Active Syn

This cable allows a user to connect a WAP G2 to a laptop or desktop for Activesync without requiring a docking station.? It?s important to note that the WAP is not charged through this USB cable.? We recommend the PS1050-G2 for charging, which is the AC power adapter used on the G1 and G2 desktop docking station ? comes with power connections for worldwide use, and plugs into the DC power jack on the base of the WAP G2....
Tether to USB A Cable

Enables users to connect USB A terminated devices (such as printers, scanners, GPS module) to the WORKABOUT PRO, 3 point tether connector improves strength and stability when connected to the device....
Cable, Tether Serial USB to RS

This Tether Serial USB to RS232 Adapter provides RS232 connectivity to the WORKABOUT PRO through the tether port on the bottom of the handheld unit....
Cable Tether

Cable tether. ...
Door for High Capacity Battery

This battery door allows the High Capacity Lithium Ion Rechargeable Battery (WA3020)? and (WA3006) to be used with the WORKABOUT PRO M/C while still ensuring that the handheld unit remains comfortable and ergonomic....
Door for High Capacity Battery

This battery door allows the High Capacity Lithium Ion Rechargeable Battery (WA3020) and (WA3006) to be used with the WORKABOUT PRO S while still ensuring that the handheld unit remains comfortable and ergonomic. ...
Backup Battery Cylindrical Lit

This is a replacement for the Internal Backup Lithium Ion cylindrical cell battery used in all WORKABOUT PRO G2 models. This user replaceable, rechargeable, lithium-ion battery is used to provide backup capacity to maintain user data during a battery swap....
High Capacity (3300 mAh) Lithi

The High Capacity Lithium Ion Rechargeable Battery pack provides 3300mAh of capacity at 3.7 volts. This Advanced Smart Battery has an included gas gauge so that the battery?s state of charge is always known. The High Capacity Lithium Ion Rechargeable battery takes up to 5 hours to fully charge. A high capacity battery door (WA3015 or 3016) is required with the High Capacity Battery....
Super High Capacity (4400 mAh)

The Super High Capacity Lithium Ion Rechargeable Battery pack provides 4400 mAh of capacity at 3.7 volts. The 4400 mAh battery offers approximately 30% more power than the 3300 mAh battery makes it ideal for solutions that deploy high-speed WWAN and WLAN radios, data capture devices and other peripherals. The 4400 mAh battery is an Advanced Smart Battery that has a power indicator so that the battery?s state of charge is always known. A super high capacity battery door (WA3017 or 3018) is...
Door for Super High Capacity B

This battery door allows the High Capacity Lithium Ion Rechargeable Battery (WA3010) to be used with the WORKABOUT PRO M/C while still ensuring that the handheld unit remains comfortable and ergonomic....
Door for Super High Capacity B

This battery door allows the High Capacity Lithium Ion Rechargeable Battery (WA3010) to be used with the WORKABOUT PRO S while still ensuring that the handheld unit remains comfortable and ergonomic....

No hay información para esta sección.

PSTIKON

La nueva PDA robusta para el mundo real. Entre los terminales portátiles de mano robustos, el Ikôn es inconfundible, siendo el dispositivo de automatización de la fuerza de trabajo móvil más sofisticado del planeta. Cójalo y notará algunas cosas de inmediato. Sienta bien. La forma en que descansa en su mano. El equilibrio. Las sensaciones. A continuación advertirá la gran pantalla brillante integral VGA y la opción de teclado QWERTY, codificado por colores para facilitar el uso....
7535G2

El 7535 G2 es ligero, bien equilibrado y se adapta cómodamente a cualquier tamaño de mano. Y el terminal también se ve bien. Puede leer la brillante pantalla VGA incluso bajo la luz solar directa. El teclado de tapa rígida, retroiluminado, junto con dos teclas Intro, hace que el uso con una sola mano no pueda ser más fácil. No importa cuanto tiempo dure el turno. Todo esto forma parte de Natural Task Support™, nuestra propuesta para la productividad móvil y el confort. Está basado en...